Ethernet communication
BMTX-SVN01C-EN 97
Figure 33. Tracer Summit network connected by BACnet routers
EIA-232 communication
Use EIA-232 communication for interfacing to non-Trane automation sys-
tems using the BACnet standard protocol. EIA-232 communication can be
accomplished using the BACnet port on the BMTX BCU termination
board (see Figure 2 on page 4).
Ethernet is not required for EIA-232 communication, but is necessary for
connection of the PC Workstation for programming and setup of the
BMTX BCU.
For more information on BACnet, see Commissioning Tracer Summit
BACnet Projects (BAS-PRB002-EN).
To Next Page
Loading...
