TRENDnet TEW-821DAP User Manual

TRENDnet User’s Guide
TEW-821DAP
14
© Copyright 2015 TRENDnet. All Rights Reserved.
Basic System Conguraons
There are four operang modes provided by TEW-821DAP, Access Point, Client Bridge,
WDS and Repeater. Congure the TEW-821DAP to dierent operaon mode which
service the best in your network.
Access Point Mode
This is the default operaon mode. TEW-821DAP service wireless end points in this
mode. You can setup local or remote wireless authencaon, setup up to 8 sets of SSIDs
in 2.4GHz band and 5GHz band, total 16 SSIDs and separate SSID or STA trac.
ÍNote: This device has dual band wireless capability allowing the access point to
broadcast a wireless network name on two separate bands, 2.4GHz and 5GHz.
Wireless clients can connect to your access on either band depending on the wireless
band supported by your wireless client. The 2.4GHz band is more commonly used and
supported for general applicaons such as Internet access and web browsing. The
5GHz band is less commonly used and supported which can be more useful for higher
or stable bandwidth applicaon requirements such as media streaming as this band
may be less likely aected by neighboring wireless networks operang on the 5GHz
band.
LAN
PWR
5GHz
2.4GHz
Access Point
Mulple SSID
SSID/STA isolaon
• Total 16 SSIDs (8 SSIDs per
band) for dierent users
grouping.
• Selectable SSID or staon
(wireless client) isolaon.

TRENDnet TEW-821DAP Specifications

General

Brand	TRENDnet
Model	TEW-821DAP
Category	Wireless Access Point
Language	English