TRENDnet TEW-821DAP - Ceiling Mounting

TRENDnet User’s Guide
TEW-821DAP
9
© Copyright 2015 TRENDnet. All Rights Reserved.
Ceiling Mounng
To ceiling mount the access point, do the following:
1 Drill three small holes on the mounng locaon and insert the plasc washers into the
holes.
2 Then place the three supplied screws into the three holes at the ceiling bracket, and
secure them into the holes on the ceiling.
3 Align and hook the TEW-821DAP to the ceiling bracket, and then push down to secure
it into place.
LAN
PWR
5GHz
2.4GHz