TEW-821DAP
29
© Copyright 2015 TRENDnet. All Rights Reserved.
• In the Network secon:
MAC Address: Display the MAC address of the access point.
IP Address: Display address of the TEW-821DAP.
Subnet Mask: Display network range of IP address.
Default Gateway: Display the default route going further from TEW-821DAP subnet.
Primary Domain Name Server: Display primary domain server address.
Secondary Domain Name Server: Display secondary domain server address.
• On the 2.4GHz / 5GHz Wireless secon:
Operaon Mode: Display which wireless mode the 2.4GHz / 5GHz interface is
set to.
Wireless Mode: Display which 802.11 wireless mode is set and running on the
2.4GHz / 5GHz interface.
Channel Width: Wireless Channel Bandwidth.
Channel (Frequency): Display which 2.4GHz / 5GHz wireless channel (and
frequency) is in use.
SSID List: Display informaon on SSID, MAC address, and security mode.
2.4G Wireless Client List
Status > 2.4G Wireless Client List
To view all wireless clients connected to the 2.4GHz interface, do the following:
1 Log into your access point management page (refer to “Log in to Management Page”
on page 10).
2 Click Status > 2.4G Wireless Client List.
The list of connected wireless clients is displayed on the screen.
3 Click Kick and Ban to send this client to MAC address lter list.
5G Wireless Client List
Status > 5G Wireless Client List
To view all wireless clients connected to the 5GHz interface, do the following:
1 Log into your access point management page (refer to “Log in to Management Page”
on page 10).
2 Click Status > 5G Wireless Client List.
The list of connected wireless clients is displayed on the screen.
3 Click Kick and Ban to send this client to MAC address lter list.
To Next Page
Loading...
Need help?
General
