TRENDnet TEW-821DAP User Manual

TRENDnet User’s Guide
TEW-821DAP
30
© Copyright 2015 TRENDnet. All Rights Reserved.
System Log
Status > System Log
To view a running log of the access point’s system stascs, events and acvies, do the
following:
1 Log into your access point management page (refer to “Log in to Management Page”
on page 10).
2 Click Status > System Log.

Congure IP Sengs
Status > IP Sengs
The TEW-821DAP has a stac IP (192.168.10.100) set for management purposes. You
can change this IP address to t your network plan or manage mulple TRENDnet access
points. You can also set the TEW-821DAP to DHCP client to accept an IP dynamically.
ÍNote: You can change the IP sengs also using the System > Wizard menu.
To start changing the IP sengs, do the following:
1 Log into your access point management page (refer to “Log in to Management Page”
on page 10).
2 Click System > IP Sengs.

3 Modify the following LAN Connecon Type eld:
• Connecon Type: Choose one of the following:
 Stac to manually congure the IP address sengs of the access point.
 DHCP to set the access point to automacally obtain IP address sengs from a
DHCP server.
4 Modify any of the following LAN Interface Seng elds:
• IP Address: Specify an IP address.
• Subnet Mask: Specify a subnet mask for the IP address.
• Default Gateway: Default route for the TEW-821DAP.
5 Click Apply to save the LAN sengs or Cancel to discard the changes.

TRENDnet TEW-821DAP Specifications

General

Brand	TRENDnet
Model	TEW-821DAP
Category	Wireless Access Point
Language	English