TRENDnet TEW-821DAP User Manual

TRENDnet User’s Guide
TEW-821DAP
40
© Copyright 2015 TRENDnet. All Rights Reserved.
3 Congure or view any of the following parameters:
• Enable: Redundant control to enable or disable the parcular SSID.
• VID: Virtual LAN ID.
• No VLAN tag: Management VLAN packets are not tagged by default.
• Specied VLAN ID: Select this if you want to separate the management VLAN.
Enabling tagging will redirect all services, including web management and DHCP,
to a specic VLAN, specied in VLAN ID eld. (1 ~ 4094).
• SSID: Showing the human readable SSID.
• Wi Security: Wireless security set to the SSID.
4 Click Apply to save the management VLAN sengs or Cancel to discard the changes.
Congure Trac Shaping Sengs
Management > Wireless Trac Shaping
Trac shaping regulates the ow of packets leaving an interface to deliver improved
Quality of Service.
To congure the trac shaping sengs, do the following:
1 Log into your access point management page (refer to “Log in to Management Page”
on page 10).
2 Click Management > Wireless Trac Shaping.

TRENDnet TEW-821DAP Specifications

General

Brand	TRENDnet
Model	TEW-821DAP
Category	Wireless Access Point
Language	English