TRENDnet TEW-821DAP User Manual

TRENDnet User’s Guide
TEW-821DAP
51
© Copyright 2015 TRENDnet. All Rights Reserved.
Using the SmartConsole
To start using the SmartConsole, do the following:
1 Click Discover ( ) to let the system automacally discover all available
devices in the network.
2 Click on the Select checkbox next to the device you wish to congure.
3 Click Device Sengs ( ) to open the selected device’s sengs page.
The Device Sengs page opens:
4 Modify the basic / wi- sengs and aer nished, click OK to save the changes or
Cancel to discard the changes.
5 Do any of the following:
• Repeat steps 1 to 4 to modify the sengs of another device.
• Click to insert the device connecon parameters manually. Then click OK and
repeat steps 2 to 4.
• Repeat step 2 and click to delete the device from the list. Click OK to the
conrmaon message.
• Use to minimize, restore, or close the main page respecvely.

TRENDnet TEW-821DAP Specifications

General

Brand	TRENDnet
Model	TEW-821DAP
Category	Wireless Access Point
Language	English