TRENDnet TEW-821DAP User Manual

TRENDnet User’s Guide
TEW-821DAP
48
© Copyright 2015 TRENDnet. All Rights Reserved.
Execute Diagnoscs Test
Management > Diagnoscs
There are 2 network tools you can use on the TEW-821DAP: ping and traceroute.
To use ping test, do the following:
1 Log into your access point management page (refer to “Log in to Management Page”
on page 10).
2 Click Management > Diagnoscs.
3 Enter the following informaon:
• Target IP address to the IP eld.
• Ping packet size to the Packet Length eld.
• Number of pings to the Number of Pings eld.
4 Click Ping to start the test.
The result is displayed as shown on the following image:
To use the traceroute test, do the following:
1 Log into your access point management page (refer to “Log in to Management Page”
on page 10).
2 Click Management > Diagnoscs.
3 Enter the target machine IP address or domain name to the Target eld.
4 Click Traceroute to start the test.
The result is displayed as shown on the following image:

TRENDnet TEW-821DAP Specifications

General

Brand	TRENDnet
Model	TEW-821DAP
Category	Wireless Access Point
Language	English