About the Trimble Juno 5series
The Trimble Juno 5series rugged handheld is rated IP65, and
combines a high sensitivity GNSS receiver with the Windows®
Embedded Handheld 6.5 Professional operating system.
The Juno 5 series includes the Juno 5Bhandheld, the Juno 5D
handheld, and the Juno 5 Barcode handheld (5B or 5D):
l
The Juno 5Band 5D handhelds have built-in Bluetooth®
wireless technology for cable-free connection to other
devices, Wi-Fi connectivity for connections to networks, and
an integrated 8MP camera with geotagging and dual LED
flash.
l
The Juno 5Dhandheld also has an integrated 3.75Gcellular
modem for downloading and transmitting data, and voice
and text capability.
l
The Juno 5 Barcode handheld (5B or 5D) has an integrated
barcode imager, enablling you to scan 1D and 2D barcodes.
The integrated GNSS receiver provides accurate 2-4 meter
positioning information with postprocessed or real-time
differential corrections. For more information, see Using the GNSS
receiver, page 60.
About this user guide
This user guide describes how to set up and use the Juno 5 series handhelds. The information in this
guide supplements the information in the Trimble Juno 5 Series Quick Start Guide, which you
received with the handheld.
Even if you have used other Global Navigation Satellite System (GNSS) or Global Positioning System
(GPS) products before, Trimble recommends that you spend some time reading this guide to learn
about the special features of the product.
Collecting GNSS data
To collect GNSS data with the Juno 5 series handheld, you must install GNSS field software onto the
handheld.
You can use the Juno 5 series handheld with compatible Mapping and GIS field and office software.
For version numbers and a complete list, see the Product Compatibility List on www.trimble.com.
For more information on using the integrated GNSS receiver, see Using the GNSS receiver, page 60.
Trimble Juno 5 Series User Guide 13