Trimble Juno 5 series User Manual

3. To use the decrypted files on the handheld, copy the files from the office computer to the
handheld’s main memory.
4. To store the decrypted files on a memory card, ensure that encryption is not enabled on the
handheld and then copy the decrypted files from the office computer to the memory card.
Inserting and removing the SIM card
CAUTION - The SIM card and its contents can be easily damaged by scratches or bending. Use caution when inserting or
removing the card.
CAUTION - The presence of any dust or moisture in the SIM card slot may adversely affect the device and void your
Trimble warranty. To prevent dust or moisture entering the SIM card slot:
–When inserting or removing a SIM card, place the handheld on a dust-free indoor surface.
WARNING - Static electricity can harm electronic components inside the handheld. To prevent static damage, discharge
static electricity from your body before you touch any of the electronic components inside your device, such as a
memory module. You can do so by touching an unpainted metal surface.
To insert or remove a SIM card:
1. Turn off the handheld (see Turning on and turning off the handheld, page 19).
2. In a dust-free indoor environment, remove the two small screws to remove the SIM card slot cover
(on the left side of the handheld).
3. Insert or remove the SIM card, with the gold contacts face down.
4. Replace the SIM card slot cover, tightening the two small screws.

Trimble Juno 5 series Specifications

General

Brand	Trimble
Model	Juno 5 series
Category	Handhelds
Language	English