Trimble Juno 5 series User Manual

To turn on or turn off the radios using the Wireless Manager
1. Open theWireless Manager (see above).
2. Do one of the following:
ll
Tap All at the top of the screen to turn on the radios, or to turn off all the radios if they are
already on.
l
Tap Wi-Fi, Bluetooth or Phone to turn on the radio that you want to use, or to turn off the
radio if it is already on.
The status fields below the Wi-Fi button, Bluetooth button and the Phone button change from Off
when the radios are turned on and show the current state of the radio. The Wi-Fi status field shows
Connecting or Available, the Bluetooth status field shows On or Visible, and the Phone status field
shows On or the name of the cellular network that you are connected to.
3.
Tap to exit the Wireless Manager.
Turning on and turning off the Bluetooth radio from within the Bluetooth application
1.
Tap / Settings/ Bluetooth.
2. Tap the Mode tab.
3. Select the Turn on Bluetooth check box to turn on the radio, or clear this check box to turn off the
radio.
4. Tap OK.
Note – If the integrated Bluetooth radio is deactivated, the message Problem with Bluetooth hardware
may appear when you try to turn on the Bluetooth radio or discover devices.
Making the handheld visible (discoverable) to other Bluetooth devices
To allow other Bluetooth-enabled devices to connect to the handheld, or if the handheld will not connect
to or pair with another device you are attempting to connect to, you must make the handheld visible
(this is sometimes referred to as “discoverable”).
To make the handheld visible to other devices:
1.
Tap / Settings/ Bluetooth.
2. Tap the Mode tab.
3. Select the Turn on Bluetooth check box, if it is not already selected. This enables the integrated
Bluetooth radio.
4. Select the Make this device visible to other devices check box, and tap OK.

Trimble Juno 5 series Specifications

General

Brand	Trimble
Model	Juno 5 series
Category	Handhelds
Language	English