Trimble Juno 5 series User Manual

Control Available settings
l
4:3 - 1.3 MP (1280x960), 3 MP (2048x1536), 5 MP (2560x1920), or 8 MP
(3264x2448)
l
5:3 - WVGA (800x480), WXGA (1280x768), 2.4 MP (2000x1200), 3.9 MP
(2560x1536), or 6 MP (3264x19600
Storage Select:Main memory or SDcard
Focus:
l
Enable - This enables the Auto Focus feature, which is activated with a double-
tap on the preview screen.
l
Disable
Image Review:
l
2 Seconds: The captured image is displayed for 2 seconds.
l
3 Seconds: The captured image is displayed for 3 seconds.
l
User Prompted: The captured image is displayed until you delete or save the
image. Tap to store the image, or to delete the image.
l
Off: The captured image is not displayed. This mode is useful for capturing
images as quickly as possible.
Image Tagging: capture date, time, and location data on images. The data can be
stored in the EXIF data or both the EXIF data and on the image.
l
Date
l
l
Date source - Device date-time, or GPS date-time. If the current GPS time is
not available (due to lack of signal), the Device Date-Time is used.
l
Stamp settings - EXIF, EXIF & Stamp, or Off
l
GPS
l
l
Format - Deg/Min/Sec (Format in Degrees, Minutes, Seconds), or Decimal
degree (Format in Degrees with decimal precision)
l
Stamp settings - EXIF, EXIF & Stamp, or Off
Note – If Image Tagging is set to EXIF & Stamp, photos taken in Portrait mode will be
displayed in Landscape mode.
APPSettings:
l
UIorientation - rotate on tilt, fixed landscape, fixed or portrait
l
Sounds - enable the beep sound while focusing and the click sound for capturing
the images, or disable.

Trimble Juno 5 series Specifications

General

Brand	Trimble
Model	Juno 5 series
Category	Handhelds
Language	English