40
Selecting a Direction Indicators
Mode
To select the required direction indica-
tors mode:
• From the Bike Set Up menu, push
the joystick down to select INDICA-
TORS and press the joystick centre
to confirm.
• Push the joystick down/up to scroll
between AUTO BASIC, AUTO AD-
VANCED and MANUAL.
– Auto Basic - The self-cancel-
ling function is on. The
direction indicators will acti-
vate for eight seconds and an
additional 65 metres.
– Auto Advanced - The self-can-
celling function is on. A quick
short press activates the di-
rection indicators for three
flashes. A longer press acti-
vates the direction indicators
for eight seconds and an addi-
tional 65 metres.
– Manual - The self-cancelling
function is off. The direction
indicators must be manually
cancelled using the direction
indicator switch.
• Press the joystick centre to confirm
the required selection.
• The display will then return to the
Bike Set Up menu.
Bike Set Up - ABS
It is possible to temporarily disable the
ABS. The ABS cannot be permanently
disabled, it will be automatically enabled
when the ignition is turned off and then
on again, or if the default riding mode is
activated by a long press of the MODE
button.
To select the required option:
• From the Bike Set Up menu, push
the joystick down to select ABS and
press the joystick centre to con-
firm.
• Push the joystick down/up to scroll
between ENABLED and DISABLED.
• Press the joystick centre to confirm
the required selection.
• The display will then return to the
Bike Set Up menu.
To Next Page
Loading...
Need help?
General
