41
Bike Set Up - Traction Control (TC)
It is possible to temporarily disable the
traction control system. The traction
control cannot be permanently disabled,
it will be automatically enabled when the
ignition is turned off and then on again,
or if the default riding mode is activated
by a long press of the MODE button.
To select the required option:
• From the Bike Set Up menu, push
the joystick down to select TC and
press the joystick centre to con-
firm.
• Push the joystick down/up to scroll
between ENABLED and DISABLED.
• Press the joystick centre to select
the required option.
The display will then return to the BIKE
SET UP display.
Bike Set Up - Service
The service interval is set to a distance
and/or time period.
To review the service interval:
• From the Bike Set Up menu, push
the joystick down to select SERVICE
and press the joystick centre to
confirm.
• Press the joystick centre to display
the SERVICE information.
• Selecting RESET allows you to reset
the standard time and distance,
and also any custom times and dis-
tances up to the standard interval
time.
• The display will then return to the
Bike Set Up menu.
Trip Setup
The Trip Set Up menu allows configura-
tion of the trip meters. Each trip meter
can be configured to be reset either
manually or automatically. The setup
procedure is the same for both trip me-
ters.
To access the Trip Set Up menu:
• Press the HOME button to display
the Main menu.
• Push the joystick down and then
press the joystick centre to select
TRIP SET UP.
The options available are:
• TRIP 1 RESET
• TRIP 2 RESET
• TRIP 2 DISPLAY
To Next Page
Loading...
Need help?
General
