The gauge returns to the Ready mode when the gauge is ready to
proceed to another menu. The selected measurement mode
(soil/asphalt) is displayed on this screen:
NOTE
The symbol in the upper right of the display indicates
that the Bluetooth is enabled and connected to the
Moisture probe or other Bluetooth device.
The symbol in the upper right of the display indicates
that the GPS is enabled.
The symbol in the upper right-hand corner indicates
that the AC charger or DC adapter are connected to the
charger connector under the gauge’s Port Cover.
The symbol i* in the upper left of the display indicates
that the gauge will need to initialize before the next
reading.
To Next Page
Loading...
