Troxler EGauge Combo 4540 - Page 76

5-9
Initialize Frequency
The Initialize Frequency function determines how often the
gauge performs an initialization, or “warm-up,” before the
measurement. Troxler recommends the default option of every
10 minutes.
To access this menu, press 3 from the Setup menu. The gauge
displays:
NOTE:
The active selection is noted by the asterisk
Select the desired count time using the corresponding number
key. The gauge displays a brief confirmation menu and returns
to the Setup menu.
5-5
1. Always *
2. 5 min
3. 10 min
4. 15 min