xvi Model 3022A Condensation Particle Counter
# Chapter 7: Calibrating the CPC
This chapter describes the method used at TSI for calibrating
the CPC’s photometric particle concentration mode.
# Chapter 8: Computer Interface and Commands
This chapter describes the computer interface hardware and
associated software commands. Included is a simple program
written in BASIC
that demonstrates how to communicate with
the CPC.
# Chapter 9: Maintenance and Service
This chapter describes the recommended practices and
schedule for routine cleaning, checking and calibration.
# Chapter 10: Applications
This chapter describes some typical applications of the CPC
including the Differential Mobility Particle Sizer (DMPS),
Diffusion Battery, and filter testing.
# Appendix A: References
This appendix lists all of the references that have been used
within the text of the manual. In addition, a general list of
references pertaining to condensation nucleus or particle
counters is included.
# Appendix B: Specifications
This appendix lists the specifications of the Model 3022A
Condensation Particle Counter.
# Appendix C: Technical Papers
This appendix includes two technical papers.
# Appendix D: Calibration and Data Sheets
This appendix contains calibration and data sheets used for the
Model 3022A CPC.
# Appendix E: Software Disks
This appendix contains the software disks for the BASIC
program provided with the Model 3022A CPC.
To Next Page
Loading...
Need help?
General
