Safety vii
Caution or Warning Symbols
The following symbols may accompany cautions and warnings to
indicate the nature and consequences of hazards:
Warns you that uninsulated voltage within the instrument may have
sufficient magnitude to cause electric shock. Therefore, it is
dangerous to make any contact with any part inside the instrument.
Warns you that the instrument contains a laser and that important
information about its safe operation and maintenance is included.
Therefore, you should read the manual carefully to avoid any
exposure to hazardous laser radiation.
Warns you that the instrument is susceptible to electro-static
dissipation (ESD) and ESD protection procedures should be
followed to avoid damage.
Indicates the connector is connected to earth ground and cabinet
ground.
To Next Page
Loading...
Need help?
General
