About this Manual
D301087 0308 - BL20 CANopen0-4
Description of Symbols Used
Warning
This sign can be found next to all notes that indicate a source of haz-
ards. This can refer to danger to personnel or damage to the system
(hardware and software) and to the facility.
This sign means for the operator: work with extreme caution.
Attention
This sign can be found next to all notes that indicate a potential
hazard.
This can refer to possible danger to personnel and damages to the
system (hardware and software) and to the facility.
Note
This sign can be found next to all general notes that supply impor-
tant information about one or more operating steps. These specific
notes are intended to make operation easier and avoid unnecessary
work due to incorrect operation.
To Next Page
Loading...
