BL20 - Gateway for CANopen
D301087 0308 - BL20 CANopen3-22
Setting the bit transfer rate through DIP-switches
The BL20 gateway can communicate with other CANopen nodes at
the following transfer rates:
The default transfer rate is 125 kbps.
The transfer rate can be set through the DIP-switches under the
cover of the BL20 gateway.
10 kbps 250 kbps
20 kbps 500 kbps
50 kbps 800 kbps
125 kbps 1000 kbps
Figure 13:
DIP-switch to set
the transfer rate
Note
All the nodes in a CANopen network must be set to the same trans-
fer rate.
To Next Page
Loading...
