D301087 0308 - BL20 CANopen 4-175
I/O-Module Objects
4
RXBUF FLUSH 0-1 The RXBUF FLUSH bit is used for
clearing the receive buffer.
If STATRES = 1:
A request with RXBUF FLUSH = 1 will
be ignored.
If STATRES = 0:
RXBUF FLUSH = 1 will clear the
receive buffer.
TXBUF FLUSH 0-1 The TXBUF FLUSH bit is used for
clearing the transmit buffer.
If STATRES = 1:
A request with TXBUF FLUSH = 1 will
be ignored.
If STATRES = 0:
TXBUF FLUSH = 1 will clear the
receive buffer.
Table 109:
Meaning of the
data bits for
RS232/485-
modules
Designation Value Description
To Next Page
Loading...
