Tuttnauer 5050 - Page 28

Page 27
This symbol is displayed
when Cycle by Clock mode is
performed.
Enter the Admin menu as
described in this manual to
change the time or to cancel
this option.
Cycle by
clock
This message is displayed if
the user presses
START/STOP key while the
"cycle by clock" mode is
active.
Enter the Admin menu as
described in this manual to
change the time or to cancel
this option.
Atmospheric
pressure not
set
This message is displayed to
set the atmosphere pressure
by opening the door for 5
minutes.
Open the door for 5 minutes
to set the Atmospheric
pressure.
Critical
settings
have been
updated,
please
restart
machine for
changes to
be updated
If a change of the autoclave
setting was made, a restart
operation is required.
Restart the autoclave for
changes to be updated.
This message is displayed if
the electrode in the chamber
senses water.
Perform a new cycle to drain
the chamber.
DOMINIQUE DUTSCHER SAS