Page 92
12 Troubleshooting
This troubleshooting chart enables the user to solve minor
malfunctions, prior to contacting our service department.
Only technical personnel having proper qualifications and holding
technical documentation (including a technician manual) and adequate
information are authorized to service the apparatus.
Message / Symbol Description
The on/ off switch is in the off
position.
The power cord is not connected
properly to the machine and the
power source.
There is no electrical power in the
main source.
An input fuse has blown
Turn the on/ off switch on.
Make sure the power cord
is properly connected to
the machine and the
power source.
Fix the electrical power
supply.
Call for service
The printer
does not print
The paper is not inserted correctly
in the printer.
Make sure the paper is
inserted in the printer
correctly (see 0).
Switch the machine off
then back on. If the
printer prints the date and
time, the printer is O.K.
This message is displayed when
any Temperature sensor or
Pressure sensor is disconnected or
out of range.
"Chamber
temperature
not in range"
This message is displayed if the
temperature in the chamber is too
high or too low from the normal
range.
Wait until the the
chamber reaches the
normal range
temperature.
"Chamber
pressure not
in range"
This message is displayed if the
pressure in the chamber is too high
or too low from the normal range.
Wait until the the
chamber reaches the
normal range pressure.
The atmosphric pressure
To Next Page
Loading...
