Page 72
5. Tear off the exceeding paper using the jagged edge (see Fig. 3/4).
Fig. 3
6. Close the printer's cover door (1) by pulling it down, with the tip end of the
paper emerging from the slot (2) (see Fig. 2).
8.3 Treating the thermal papers:
• Store the papers in a dry, cool, and dark place.
• Do not rub the papers with hard substance.
• Keep the papers away from organic solvent.
Cautions!
Never disassemble the printer. Failure to follow this instruction
may cause overheating or burning of the printer or the AC
adapter. Or an electric shock, which may lead to fires or
accidents.
Never use the printer in a place of extreme humidity or any place
where it can possibly be splashed by any liquids. If any liquids get
into the printer, it could lead to fire, electric shock, or other
serious accidents.
Never touch the thermal head immediately after printing because
it becomes very hot. Make sure that the thermal head is cool
before setting papers or cleaning the thermal head.
To Next Page
Loading...
