Page 51
6.2 Screens following aborted cycles after complete
sterilization stage
The sterilization phase ended successfully – cycle ended, and the
reason of failure is displayed.
For example, the next two scenarios:
Canceled by user after complete sterilization stage
The cycle ended successfully, the reason for aborted cycle is
displayed.
Pressure Time Error Failure occurrence after complete sterilization
stage
The cycle ended successfully; the reason of failure is displayed.
6.3 Screens following a fail cycle:
In this case, the display becomes yellow, a warning sign and the
reason of failure will be displayed.
For example, the next two scenarios:
To Next Page
Loading...
