Tyco Electronics Galaxy SC Controller J85501F-1
Issue 13 February 2001 Table of Contents - 11
Reporting Commands A - 10
System Defined Aliases A - 14
Error Reporting A - 15
Appendix B T1.317 Objects and Attributes
Appendix C T1.317 Error Messages
Error Messages and Causes C - 1
Syntax Related C - 1
Security Related C - 2
Command Execution Related C - 2
Diagnostic Messages C - 6
Appendix D TL1 (Transaction Language 1) and X.25
Interface
Introduction D - 1
Equipment Setup and Installation D - 1
Tools and Parts D - 2
Galaxy Unit Setup D - 3
PAD Unit Setup D - 3
PAD Setup D - 7
PVC Port Setup D - 10
SVC Port Setup D - 10
Debugging TL1 D - 11
Debugging OS to PAD Connection D - 11
Test the RS-232/485 Converter to Galaxy D - 13
Test the OS to PAD D - 14
General Operational Considerations D - 14
Galaxy TL1 Configuration D - 15
Auxiliary Port D - 15
Backup or Restore D - 15
Command Format D - 16
Command D - 16
TID (Target Identification) D - 16
AID (Access Identification) D - 16
CTAG (Correlation Tag) D - 17
GB (General Block) and PB (Parameter Block) D - 17
Condition Type D - 17
Service-Affecting D - 17
Setup Procedure for Galaxy to Communicate Messages
With Operating Systems (OSs) D - 17
TL1 Commands Supported by Galaxy D - 18
To Next Page
Loading...
