Ublox SARA-R4 Series User Manual

SARA-R4/N4 series-AT Commands Manual
UBX-17003787 - R09

4General
Page 24 of 307
Parameter Type Description
<snt> Number It indicates the requested serial number type. Depending on <snt> value, the <sn>
parameter in the information text response provides different information:
• 0 (default value): International Mobile station Equipment Identity (IMEI)
• 1: International Mobile station Equipment Identity (IMEI)
• 2: International Mobile station Equipment Identity and Software Version number
(IMEISV)
• 3: Software Version Number (SVN)
• 255: IMEI (not including the spare digit), the check digit and the SVN
4.7.4Notes
SARA-R4 / SARA-N4
• The <snt> parameter is not supported.
• The response to the test command does not provide the information text response.
4.8IMEI identification +GSN
+GSN
SARA-R404M SARA-R410M-01B SARA-R410M-02B SARA-R410M-52B SARA-R412MModules
SARA-N4
Syntax PIN required Settings saved Can be aborted Response time Error referenceAttributes
full No No No - +CME Error
4.8.1Description
The commands handling is the same of +CGSN.
4.8.2Syntax
Type Syntax Response Example
Action AT+GSN[=<snt>] <sn>
OK
004999010640000
OK
Test AT+GSN=? OK
4.8.3Defined values
See +CGSN AT command.
4.9Identification information I
I
SARA-R404M SARA-R410M-01B SARA-R410M-02B SARA-R410M-52B SARA-R412MModules
SARA-N4
Syntax PIN required Settings saved Can be aborted Response time Error referenceAttributes
partial No No No - +CME Error
4.9.1Description
Returns some module information as the module type number and some details about the firmware version.
The information text response of ATI9 contains the modem version and the application version of the
module where applicable; it returns "Undefined" where not applicable.
4.9.2Syntax
Type Syntax Response Example
Action Ordering code request
ATI[0]
<type_number>
OK
ATI0
SARA-G350-00S-00
OK

Ublox SARA-R4 Series Specifications

General

Brand	Ublox
Model	SARA-R4 Series
Category	Control Unit
Language	English