Ublox SARA-R4 Series - Repeat Last Command a

SARA-R4/N4 series-AT Commands Manual
UBX-17003787 - R09

4General
Page 27 of 307
4.13Repeat last command A/
A/
SARA-R404M SARA-R410M-01B SARA-R410M-02B SARA-R410M-52B SARA-R412MModules
SARA-N4
Syntax PIN required Settings saved Can be aborted Response time Error referenceAttributes
full No No No - +CME Error
4.13.1Description
Repeats the previously executed command again. Only the A/ command cannot be repeated.
If autobauding is active, the MT is not able to recognize the command and the command A/ cannot be
used.
4.13.2Syntax
Type Syntax Response Example
Action A/