EasyManua.ls Logo

Ublox SARA-R4 Series - Preferred Message Storage +CPMS

Ublox SARA-R4 Series
307 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
SARA-R4/N4 series-AT Commands Manual
UBX-17003787 - R09
9Short Messages Service
Page 67 of 307
9.2.2Syntax
Type Syntax Response Example
Set AT+CSMS=<service> +CSMS: <mt>,<mo>,<bm>
OK
AT+CSMS=1
+CSMS: 1,1,1
OK
Read AT+CSMS? +CSMS: <service>,<mt>,<mo>,
<bm>
OK
+CSMS: 0,1,1,1
OK
Test AT+CSMS=? +CSMS: (list of supported
<service>s)
OK
+CSMS: (0-1)
OK
9.2.3Defined values
Parameter Type Description
<service> Number
0: see 3GPP TS 23.040 [8] and 3GPP TS 23.041 [9]; syntax of AT commands is
compatible with 3GPP TS 27.005 [16] phase 2; phase 2+ features may be supported
if no new command syntax is required
1: see 3GPP TS 23.040 [8] and 3GPP TS 23.041 [9]; syntax of AT commands is
compatible with 3GPP TS 27.005 [16] phase 2+
<mt> Number Mobile terminated messages:
0: not supported
1: supported
<mo> Number Mobile originated messages:
0: not supported
1: supported
<bm> Number Broadcast messages:
0: not supported
1: supported
9.2.4Notes
SARA-R4 / SARA-N4
Set <service> to 1 to acknowledge an incoming message (either SMS or Status Report) with +CNMA AT
command.
If <service> is changed from 1 to 0 and one or more parameters of the +CNMI command are in phase 2+,
switch the +CNMI parameters to phase 2 specific values before entering phase 2.
9.3Preferred message storage +CPMS
+CPMS
SARA-R404M SARA-R410M-01B SARA-R410M-02B SARA-R410M-52B SARA-R412MModules
SARA-N4
Syntax PIN required Settings saved Can be aborted Response time Error referenceAttributes
partial Yes NVM No Up to 3 min +CMS Error
9.3.1Description
Selects memory storages <mem1>, <mem2> and <mem3>. If the chosen storage is supported by the MT but
not suitable, the +CMS ERROR: <err> error result code should be returned.
See the test command for the supported memory types for each memory storage.
9.3.2Syntax
Type Syntax Response Example
Set AT+CPMS=<mem1>[,<mem2>[,
<mem3>]]
AT+CPMS: <used1>,<total1>,
<used2>,<total2>,<used3>,<total3>
OK
AT+CPMS="BM","SM","SM"
+CPMS: 0,5,0,50,0,50

Table of Contents

Other manuals for Ublox SARA-R4 Series

Related product manuals