SARA-R4/N4 series-AT Commands Manual
UBX-17003787 - R09

AAppendix: Error result codes
Page 271 of 307
Numeric error code Description
5 Error setting initial Default MQTT values
10 Error creating new MQTT context in response to UMQTT
11 Error in memory allocation for UMQTT command's response
12 Error in UMQTT command number of arguments
13 Error in UMQTT command syntax
14 UMQTT command parameter Invalid Error
15 Length (or termination) Error in UMQTT parameter
16 Range Error in UMQTT command parameter
17 UMQTT context Invalid Error
18 UMQTT memory allocation failure Error
19 UMQTT Profile Restore From or Save To Fail Error
20 Error creating new MQTT context in response to UMQTTC
21 Error in memory allocation for UMQTTC command's response
22 Error in UMQTTC command number of arguments
23 Error in UMQTTC command syntax
24 UMQTTC command parameter Invalid Error
25 Length (or termination) Error in UMQTTC command specifier
26 Range Error in UMQTTC command specifier
27 UMQTTC context Invalid Error
28 No MQTT connection when attempting UMQTTC
29 Error in UMQTTC's parameter length (or termination)
30 Error in UMQTTC parameter range
40 Error in memory allocation for UMQTTER command's response
41 Error in UMQTTER command syntax
50 IP Address invalid error
51 IP Address conversion failed
60 Input parameter invalid Error
61 Error in response to get Device
70 Hex input invalid Error
71 Hex conversion failed Error
80 Attempt to display field(s) that exceed(s) the display size (suppressed)
100 Generic memory allocation failed Error
110 QAPI FS Statvfs failed Error
111 QAPI FS Mk Dir failed Error
112 QAPI FS Open failed Error
113 QAPI FS File Missing (only sometimes checked for explicitly
114 QAPI FS Stat failed Error
115 QAPI FS Read failed Error
116 QAPI FS Write failed Error
117 QAPI FS Close failed Error
118 QAPI FS Unlink failed Error
120 QAPI FS Restore file noexist Error
130 Failed allocation Error during Restore
150 QMI DMS Init failed Error
151 QMI DMS De-Init failed Error
160 QMI DMS send msg fail Error
165 QMI DMS Dev response fail Error
166 QMI DMS Dev no IMEI fail Error
167 QMI DMS Dev IMEI Invalid Error
200 No Unique Client ID specified Error
201 No Remote Server specified Error
202 No Local Client IP Address specified Error
240 Error encountered when setting MQTT Connect callback
241 Error encountered when setting MQTT Subscribe callback
242 Error encountered when setting MQTT Message callback
To Next Page
Loading...
Need help?
General
