Unify OpenScape CP205

Getting to know the OpenScape Desk Phone CP200/CP205 14
1 You can make and receive calls as normal using the handset.
2The Display permits intuitive use of the phone (2-line).
3
Incoming calls and new voicemails are visually signaled via the notification LED.
4
You can customize your telephone by assigning phone numbers and functions to the
programmable keys.
Preset default values:
• Call lists
• Display phonebook
• Call forwarding?
• Saved number redial?
5
The dialpad can be used to enter phone numbers and write text.
6
Use the navigation keys, for example, to open the idle menu, to move conveniently
through the different menus with telephone functions, applications and configurations or
to execute an action.
7
Use the function keys to launch the following functions:
Ä: hold an active call with the hold key.
Ã: transfer a call to another subscriber with the call transfer key.
Á: initiate a conference with the conference key.
Â: check information and voicemails with the mailbox key.
@: open the service menu with the service key.
:: switch the handsfree function on/off with the speaker key.
.: answer/end calls via the headset with the headset key.
": adjust or browse the volume, brightness or contrast with the rocker button.
;: switch the microphone on/off with the mute key. This function is useful to prevent
the other party from listening in under certain circumstances, for example when consult
-
ing with someone else in the room or in case of annoying background noise.