86 Other settings and functions
Using timed reminders
Prerequisite: You have saved a reminder. The saved time arrives.
The phone rings.
^ Lift the handset. The appointment time is displayed.
\ Replace the handset.
Using a different telephone in the same way
as your own
You can log on to another telephone belonging to the OpenScape 4000 system
using a personal identification number (PIN). This also applies to telephones in
networked OpenScape 4000 systems, for example at other company locations.
At the other telephone you can then
• make calls and assign the charges to cost centers,
• make calls and assign the charges to specific projects,
• check your mailbox,
• use a number saved on your phone for saved number redial,
• enter appointments.
Using an internal PIN, you can have your calls diverted to a telephone in the of-
fice or department where you will be for a temporary period (call forwarding - "fol-
low me").
Logging on to another telephone
Prerequisite: You have been assigned a PIN by your administrator. You require
an internal PIN for calls within your own OpenScape 4000 system, while for calls
involving other OpenScape 4000 systems in the integrated network you require
a network-wide PIN.
@ Open the menu Page 19.
Select and confirm the option shown.
Select and confirm the option shown.
If you have several PINs and wish to use another one, select the other PIN.
j At the display "Enter station no:" or "Enter ID", you are prompted to enter your
PIN.
If you do not lift the handset, the phone rings several more times and "Re-
minder" is displayed before the reminder is deleted.
To Next Page
Loading...
Need help?
General
