Unify OpenScape CP205

44 Making calls
Forwarding calls
Forwarding calls automatically
Forwarding of internal and external calls in the system can be configured and
activated for your line by your administrator. The following calls may be forward-
ed:
• All calls unconditionally
• When the line is busy
• Call forwarding no reply
Delayed call forwarding
This forwarding type can be used for initial and/or second calls.
Initial call
Prerequisite: "Call forwarding no reply" is activated  Page 45.
The caller hears the ringing tone and is not forwarded to another extension until
after a certain time (
 Page 48).
Second call
Prerequisite: Second call  Page 23 and "Forwarding on busy/after timeout" or
"Call forwarding no reply" are activated
 Page 45.
If a second call is incoming, you will automatically hear a call waiting tone and
see information about the caller. You then have the option of answering this call
before call forwarding is activated (you may be urgently awaiting this call for in-
stance).
Please note the description for programming call forwarding  Page 45.