Unify OpenScape CP205

Other settings and functions 91
System-wide speaker call
You can place a speaker call from your phone to any internal party with a tele-
phone equipped with speakerphone mode or a loudspeaker.
Speaker call to a variable destination
A destination party is contacted via his or her internal phone number.
^ Lift the handset.
or
: Press the key shown for speakerphone mode.
j Enter the system code for "Speaker call-one-way" (consult your administrator if
necessary).
or
Press the programmed "Spkr. 1-way" key.
j Enter the internal phone number of the party.
A connection to that user's loudspeaker will immediately be established if
• the station is not busy,
• the handset has not been lifted and
• speaker call protect is not activated.
Z The caller hears a confirmation tone when the connection has been established
and can start speaking.
^ The called party can answer the call by lifting the handset.
: If the party to whom you are speaking presses the speaker key
or
the line key (if configured), the connection will be aborted.
Spkr. 1-way
_
Line 1
_
The number of possible speaker calls and normal calls is the same.