Unify OpenScape CP205 - Displays

Making calls 49
Deactivating variable forwarding
For "Forwarding for internal" and "Forwarding for external".
Press the Umleitung key with the illuminated LED.
For all other forwarding types:
€ Open the idle menu  Page 15.
Select and confirm the option shown.
Forwarding is deactivated and the destination number is deleted.
Displays
In idle mode  Page 15, the following signals remind you that forwarding is ac-
tivated:
Fixed/variable forwarding
The number/name of the forwarding destination is shown on the display. The
"Umleitung" key illuminates.
Forwarding for internal/external
The status is shown in the display. The "Umleitung" key illuminates.
ß
_
Deact call forwarding? f
Call forwarding can also be preconfigured in the system  Page 44.
Forwarding to
220870 PETER
f
Call forwarding is on
f
There is no display message for the forwarding types "Busy", "No answer"
and "Busy/no answer". The key LED does not light up.