Unify OpenScape CP205

Making calls 57
Saving phone numbers for redial
Saving the current phone number
Prerequisite: You are conducting a call. Your call partner's number is shown on
the display.
Select and confirm the option shown.
Saving any phone number
Prerequisite: Your phone is in idle mode  Page 15.
@ Open the menu  Page 19.
Confirm the option shown.
Select and confirm the option shown.
Confirm the option shown.
j Enter the phone number.
Confirm the option shown.
Using the second call feature
Answering a second call via the menu
Prerequisite: You are conducting a call and the "Camp/Overide" function is ac-
tivated (
 Page 23).
Z A second call is signaled via the call waiting tone. The caller hears the ring tone
as if you were "free".
Select and confirm the option shown
[1]
.
[ You can talk to the second party. The connection to the first party is on hold.
Answering a second call with a function key
Prerequisite: "Second call" is activated ( Page 23). The "Pickup" function key
(
 Page 28) is programmed.
[ You are conducting a call.
Z You hear an alerting tone.
Press the "Pickup" function key.
[ You are connected to the second caller. The first party is placed on hold.
This phone number is saved under the idle menu entry "Saved number re-
dial?" and overwrites previously saved phone numbers. Dial the saved
number from the idle menu
 Page 35.
Save number? f
Destinations? l
Saved number redial? f
New entry? l
Save? l
Answer camp-on? l
Pickup
£