Making calls via multiple lines (MultiLine) 77
Entering a call on a line (three-party conference)
Prerequisite: A call is in progress on one of the lines. The line key LED lights up.
Press the line key. You and the other parties already connected can hear the
conference. All three parties can speak with one another. The LED remains light-
ing.
Allowing or blocking a party from joining a call
Allowing a party to join a call
Your primary line can be configured so that other parties may not join calls on
that line when it is busy. In this case, you can allow other parties to join a call.
This permission applies to the current call or the next call.
[ You are already conducting a call on one line.
or
^ Lift the handset.
With a programmed function key
Press the programmed function key "Privacy".
Via the menu
@ Open the menu Page 19.
Select and confirm the option shown.
Select and confirm the option shown.
Other parties can now join the call.
Line
¤
You cannot enter a conference if the "Privacy" function is activated on the
line. If one of the three parties hangs up, the other two remain connected.
If a connection remains between you, as the entering party, and one of the
other parties who previously occupied the line, consultation is no longer
possible.
Privacy
_
To Next Page
Loading...
Need help?
General
