Unify OpenScape CP205

Making calls 47
Activating and deactivating fixed forwarding by
means of an option
You can activate/deactivate fixed forwarding using the switch function.
@ Open the menu  Page 19.
Select and confirm the option shown.
Select and confirm the option shown to activate or deactivate fixed forwarding.
"Fixed call forw. is on" or "FWD-FIXED off" is displayed.
Variable forwarding (all calls)
In the case of variable forwarding, programming a forwarding destination acti-
vates forwarding for all calls. If forwarding is deactivated, the forwarding desti-
nation is deleted at the same time.
Configuring and activating variable forwarding
€ Open the idle menu  Page 15.
Select and confirm the option shown.
or
@ Open the menu  Page 19.
Confirm the option shown.
Confirm the option shown.
The display shows "Variable forwarding".
Select and confirm the option shown.
j Enter the forwarding destination number.
Confirm when the complete number has been entered.
Forwarding is saved and activated.
Deactivating variable forwarding
Press the Umleitung key with the illuminated LED.
or
€ Open the idle menu  Page 15.
Select and confirm the option shown. Call forwarding is deactivated. The desti-
nation number is deleted.
Feature settings? g
Call forwarding? g
Act. FWD-VAR-ALL-BOTH? f
Destinations? l
Call forwarding? l
Enter destination: f
Save? l
If you enter a cross-system number, you have to complete entry of the
phone number by pressing
#.
ß
_
Deact call forwarding? f