Unify OpenScape CP205

Making calls via multiple lines (MultiLine) 79
Third-party monitoring
During a call, a predefined party can be prompted to join the call as a "witness"
using the "Slnt Mon Req" programmed function key. The third party on the call
is not informed that a "witness" is joining the call. The "witness" cannot partici-
pate in the call; they can only hear what is being said.
Prerequisite: Third-party monitoring is configured on your system and the "Slnt
Mon Req" programmed function key is configured on your phone. You are con-
ducting a call. "Privacy" must be deactivated.
Briefly press the programmed function key "Slnt Mon Req" twice. The "witness"
hears a special tone on their phone and the message "Connect witness or tape"
appears on both your display and the "witness" display.
^ The "witness" lifts the handset.
or
The "witness" presses the line key for the line on which the call is being conduct-
ed.
The "witness" can now listen to the call without being noticed.
Deactivating
Press the programmed function key "RTRLN". The LED goes out. Calls are sig-
naled on the phone again.
When configuring and using third-party monitoring, please note the appli-
cable data protection regulations.
Slnt Mon Req
_
Line 1
£
Only the "witness" can end silent monitoring by hanging up or by pressing
the line key.
RTRLN
_