Unify OpenScape CP205 User Manual

96 Other settings and functions
Saving a forwarding destination for fax/PC/busy
station – activating call forwarding
@ Open the menu  Page 19.
Confirm the option shown.
Select and confirm the option shown.
j Enter the code for the call forwarding type you wish to set. Codes are assigned
by your administrator. You can enter the codes applicable to you in the table be-
low:
j Enter the number of the other station.
Confirm the option shown.
j Enter the PIN
Confirm the option shown.
j Enter the destination number.
Confirm the option shown.
Call forwarding is activated immediately.
Destinations? l
Forwarding station No.? f
"Forwarding for fax":
"Forwarding for PC":
"Forwarding on busy":
Completed? l
Completed? l
Save? l

Unify OpenScape CP205 Specifications

General

Resolution	320 x 240 pixels
Connectivity	Ethernet
Mounting	Desk or wall mountable
Speakerphone	Yes
USB Port	No
HD Voice	Yes
Bluetooth	No
Wi-Fi	No
Power over Ethernet (PoE)	IEEE 802.3af
Protocols	SIP
Ethernet Ports	2 (10/100 Mbps)
Supported Codecs	G.711, G.722, G.729