Telephone settings 27
Additional selected dialing key functions
Prerequisite: You have defined a phone number for a selected dialing key and
are still in the menu
Page 26.
Entering an automatic consultation call
Select and confirm the option shown. "RF" appears on the display:
j Add the destination number.
Entering a number with a pause (example)
Select and confirm the option shown. "P" appears on the display.
j Enter additional numbers.
Selected dialing keys with enhanced functions
Some functions are not available via the menu, rather you have to enter codes
to access them. These codes are configured in the OpenScape 4000. You can
obtain these codes from your administrator.
Example: Locking the phone with simultaneous call forwarding
*20 Enter the phone locking code.
#247 Activate the code for call forwarding.
j Enter the destination phone number.
If you press this key during a call, a consultation call is initiated immediate-
ly. The first party is placed on hold and the number of the saved destination
is dialed.
A pause is three characters long.
The codes used here are examples and may differ from the settings in
your system.
In networked systems, the sequence must end with (.
To Next Page
Loading...
