Unify OpenScape CP205

Other settings and functions 93
Speaker call to a fixed destination
The system code for "COM group speaker call" and the speed-dial number for
the corresponding group member are programmed on a selected dialing key
 Page 27.
Press the programmed selected dialing key. A connection to the destination
loudspeaker is established immediately.
^ The called party can answer the call by lifting the handset.
: If the party to whom you are speaking presses the speaker key
or
the line key (if configured), the connection will be aborted.
Two-way intercom to a variable destination
When using the two-way intercom in a group, the loudspeaker and microphone
of the destination phone are automatically switched on.
^ Lift the handset.
or
: Press the key shown for speakerphone mode.
j Enter the system code for "Speaker call-two-way" (consult your administrator if
necessary).
or
Press the programmed "COM Spk 2way" key.
j Enter the speed-dial number for the corresponding group member.
The loudspeaker and microphone of the destination phone are switched on au-
tomatically.
Two-way intercom to a fixed destination
The system code for "Speaker call-two-way" and the speed-dial number for the
corresponding group member are programmed on the selected dialing key
 Page 27.
Press the programmed key.
The loudspeaker and microphone of the destination phone are switched on au-
tomatically.
123456
_
Line 1
_
COM Spk 2way
_
DSS
_