102 Making calls via multiple lines (MultiLine)
Third-party monitoring
During a call, a predefined party can be prompted to join the call as a "witness"
using the "Slnt Mon Req" programmed function key. The third party on the call
is not informed that a "witness" is joining the call. The "witness" cannot
participate in the call; they can only hear what is being said.
Prerequisite: Third-party monitoring is configured on your system and the
"Slnt Mon Req" programmed function key is configured on your phone. You are
conducting a call. "Privacy" must be deactivated.
S Briefly press the programmed function key "Slnt Mon Req" twice. The "witness"
hears a special tone on their phone and the message "Connect witness or tape"
appears on both your display and the "witness" display.
^ The "witness" lifts the handset.
or
T The "witness" presses the line key for the line on which the call is being
conducted.
The "witness" can now listen to the call without being noticed.
When configuring and using third-party monitoring, please note the
applicable data protection regulations.
Only the "witness" can end silent monitoring by hanging up or by pressing
the line key.
To Next Page
Loading...
