Making calls via multiple lines (MultiLine) 99
Identifying the line used
If several lines are occupied at the same time, you can determine which one you
are currently using for a call.
With a programmed function key
S Press the programmed function key "Line in Use".
Via the menu
Settings Open the menu Page 19.
Select and confirm the option shown.
Select and confirm the option shown.
Select and confirm the option shown.
The line number and status of the line currently in use are displayed.
Making calls on multiple lines alternately
Prerequisite 1: Your administrator has specified that when you change lines,
the lines are placed on hold and can only be disconnected by replacing the
handset or pressing the disconnect (release) key.
Prerequisite 2: You are connected to multiple parties via two or more lines.
These may be callers
Page 93 or called parties Page 95.
You are making a call, for example on line 1. The line key of the station on hold
flashes slowly.
T Press the line key 2 that is flashing slowly. The first call party is on hold on line 1.
T Press the line key 1 that is flashing slowly. The second call party is on hold on
line 2.
You can switch between lines as often as you wish.
To Next Page
Loading...
