Unify OpenScape Desk Phone IP 35G

112 Individual phone configuration
Setting local ring tones
Selecting and configuring the call type
The ringer mode "Local ringer" is set. Different ring tone types are sent by the
Hipath/OpenScape 4000. Not all of the following types will necessarily be used
in your system configuration:
• Internal
• External
•Buzz
• Rollover
• Single alert
• Multiple alert
• Special 1
• Special 2
• Special 3
• Attention
• Unspecified
• US DSN-Precedence
• US DSN-Routine
•Emergency
Select the required call type and adjust to suit your requirements.
z
You can also configure the following setting via the Enter code!  Page 119.
Settings Open the menu
 Page 19.
Select and confirm the option shown.
if nec.
j Enter and confirm the user password.
Select and confirm the option shown.
Select and confirm the option shown.
For instance, select "Internal" and confirm the option shown.
Select the required ringer file
[
1
]
or "pattern". You will hear the associated ringer
melody. Confirm the current ringer file.
User f
Ringer? f
Local ringers? f
Internal? f
ABC.wav f
1. The phone displays the current setting