Basic functions 33
Additional forwarding types
This description applies for the following forwarding types:
• Forwarding for intnl
• Forwarding for extnl
• Forwarding on busy
• Call forwarding no reply
• Forwarding on busy/after timeout
Call forwarding is activated when a forwarding destination is programmed. If
forwarding is deactivated, the forwarding destination is deleted at the same time.
Configuring and activating forwarding
Settings Open the menu Page 19.
Select and confirm the option shown.
Confirm the option shown.
Confirm the option shown.
Variable forwarding is offered first.
Confirm until the required forwarding type
Page 30 is shown in the first line.
Setting forwarding no reply
Forwarding type with status.
Select and confirm the option shown.
j Enter the forwarding destination number.
Confirm when the complete number has been entered. The status is set to
"FWD-VAR-RNA-BOTH on".
Select and confirm the option shown if you wish to change the preset 0 seconds.
Confirm the option shown.
j Enter the time in seconds after which the system should forward your call. You
can enter up to 60 seconds. If you enter 0, the system forwarding time is applied.
The time set here is also applied to the "Forwarding on busy/after timeout"
forwarding type.
Confirm the option shown.
Ringing duration until forwarding f
To Next Page
Loading...
