Unify OpenScape Desk Phone IP 35G

110 Individual phone configuration
Individual phone configuration
Adjusting the display contrast
Vol.+ or Vol.- Press one of the keys shown in idle mode  Page 16.
Select and confirm the option shown.
Vol.+ or Vol.- Change the setting. Keep pressing the key until the desired contrast is set.
k Save.
Audio
Setting the ringer mode
You can use the two ringer mode options
• HiPath
• Local ringer
to decide how the ring tone is generated on the telephone. With the setting
"HiPath", the system sends the ring tone type and the dependent ring tone,
which you can adjust subsequently
 Page 111.
If "Local ringer" is selected, the system sends the ring tone type and you select
which ring tone is required for the respective ring tone type in the "Local ringers"
menu
 Page 112.
z
You can also configure the following setting via the Enter code!  Page 119.
Settings Open the menu
 Page 19.
Select and confirm the option shown.
if nec.
j Enter and confirm the user password.
Select and confirm the option shown.
Select and confirm the option shown.
Select and confirm the option shown.
or
Select and confirm the option shown.
Select and confirm the option shown.
Display contrast? f
User? f
Ringer? f
Ringer mode? f
HiPath? f
Local.ringer? f
Option = Save & exit? f