Unify OpenScape Desk Phone IP 35G

32 Basic functions
Activating/deactivating fixed forwarding
You can also activate/deactivate fixed forwarding using the switch function.
Settings Open the menu
 Page 19.
Select and confirm the option shown.
Select and confirm the option shown.
Select and confirm the option shown to activate or deactivate fixed forwarding.
"Fixed call forw. is on" or "FWD-FIXED off" is displayed.
Variable forwarding (all calls)
In the case of variable forwarding, programming a forwarding destination
activates forwarding for all calls. If forwarding is deactivated, the forwarding
destination is deleted at the same time.
Configuring and activating variable forwarding
d Open the idle menu  Page 16.
Select and confirm the option shown.
or
Settings Open the menu
 Page 19.
Select and confirm the option shown.
Confirm the option shown.
Confirm the option shown.
The display shows "Variable forwarding".Enter code!
Select and confirm the option shown.
j Enter the forwarding destination number.
Confirm when the complete number has been entered.
Forwarding is saved and activated.
Deactivating variable forwarding
R If configured: Press the illuminated "Call forwarding" key.
or
d Open the idle menu  Page 16.
Select and confirm the option shown.
Call forwarding is deactivated. The destination number is deleted.
Program/Service?
l
Feature settings? g
Call forwarding? g
Act. FWD-VAR-ALL-BOTH? f
Program/Service?
l
Destinations?
l
Call forwarding?
l
Enter destination: f
Save?
l
If you enter a cross-system number, you have to complete entry of the
phone number by pressing (.
Deact call forwarding? f