Enhanced phone functions 53
System-wide parking
You can park up to 10 internal and/or external calls on the Hipath/OpenScape
4000 and resume them at another telephone.
There are two options for parking a call:
• Automatic park
• Manual park
Calls cannot be parked if:
• All park positions are busy.
• The park position you wish to use is busy.
• The station is the attendant console.
• The call is a consultation call.
• The call is in a conference.
Automatically parking a call
You can automatically park a call in a free park position on your phone and
retrieve it on your own telephone or on another one.
Parking a call
S Press the programmed "System Park" key. The first free park slot is used and
indicated on the display. The call is parked.
\ Replace the handset.
Retrieving a parked call
S Press the programmed "System Park" key.
0 ... 9 Enter the park slot number of the parked call and proceed with the call.
You can also put the call on hold first by confirming "Consultation?" and
then parking the call.
To Next Page
Loading...
