96 Making calls via multiple lines (MultiLine)
Holding a call on the trunk key
Hold Press the "Hold" key. The line key LED flashes slowly.
Saved number redial for a specific line
(saved phone number)
If this type of saved number redial is configured on your system, you can save
a phone number for subsequent redial on a particular line
Page 97. The
saved phone number is dialed using the line key and the saved number redial
key.
^ Lift the handset.
or
Speaker Press the key shown.
Display message.
S Press the relevant line key. The LED lights up.
Select and confirm the option shown.
or
Redial Press the key shown. The phone number is saved for the current line.
Last number dialed for a specific line
The last phone number dialed via your primary line is saved.
If this type of saved number redial is configured on your system, every last
number dialed for the current line is automatically saved for redial.
^ Lift the handset.
or
Speaker Press the key shown for speakerphone mode.
S Press the required line key. The LED lights up.
Confirm the option shown.
^ Lift the handset.
or
Speaker Press the key shown for speakerphone mode.
Your Hipath/OpenScape 4000 system can also be configured so that the
call is held by pressing the line key. Please test this or, if necessary, consult
your administrator.
The redial number you saved on the specific line may have been
overwritten by another team member.
To Next Page
Loading...
